CHO-BOND 1035

CHO-BOND 1035

Is a one-component RTV silicone adhesive/sealant that can provide both environmental seal ing and EMI shielding. It is well suited for bonding commercial-grade conductive elastomer gaskets and enclosure flanges, and serves as a conductive caulking material in enclosure seams. Its silver-plated-glass filler gives the material a volume resistivity of 0.05 ohm-cm. It is non-corrosive and forms a skin within minutes. Curing occurs without pressure in the presence of moisture. Packaging choices include 2.5 oz (71 g) metal tubes and 10 oz (0.3 kg) tubes for pneumatic dispensers.

If you are looking to purchase Cho Bond 1035 please visit the stocking distributor Marketing East for more information

Cho Bond 1035 Data Sheet (PDF)

Binder SILICONE
Filler Ag/glass
Mix Ratio (by wgt.) 1-part
Consistency thin paste
Specific Gravity 1.9 ±0.10
Minimum Lap Shear
Strength, psi (MPa)
100 (0.69)
Minimum Die Shear*
Strength, psi (MPa)
Maximum DC
Volume Resistivity,
ohm-cm
0.05
Use Temperature –67 to 392°F (–55 to 200°C)
Elevated
Temperature
Cure Cycle
NA
Room Temperature
Cure
1 wk.***
Working Life 0.5 hr.
Shelf Life, mos. 6
Coverage, in.2/lb.
(cm2/g)
1,500 (21.3)
Recommended
Thickness, in. (mm)
0.007 min. (0.18)
VOC, g/liter 151
* Alumina die on gold
** at -40°F (-40°C)
NA Not Applicable
Product Partnumber Unitsize Price In Stock
CHO-BOND 1035 51-00-1035-0000 2.5 ounce kit (71 g) RFQ Only Yes
CHO-BOND 1035 51-01-1035-0000 10 ounce kit (0.3 kg) RFQ Only Yes

Comments are closed.